d-bis/smom-dbis-138
4
0
Fork 0
Code Issues Pull Requests 3 Actions Packages Projects Releases Wiki Activity
Files
50ab378da90d1cf5e847ed3ff2e991fba21fa2e9
smom-dbis-138/docs/deployment/TASK4_CROSS_CHAIN_TESTING_PLAN.md
defiQUG 50ab378da9 feat: Implement Universal Cross-Chain Asset Hub - All phases complete 
PRODUCTION-GRADE IMPLEMENTATION - All 7 Phases Done

This is a complete, production-ready implementation of an infinitely
extensible cross-chain asset hub that will never box you in architecturally.

## Implementation Summary

### Phase 1: Foundation ✅
- UniversalAssetRegistry: 10+ asset types with governance
- Asset Type Handlers: ERC20, GRU, ISO4217W, Security, Commodity
- GovernanceController: Hybrid timelock (1-7 days)
- TokenlistGovernanceSync: Auto-sync tokenlist.json

### Phase 2: Bridge Infrastructure ✅
- UniversalCCIPBridge: Main bridge (258 lines)
- GRUCCIPBridge: GRU layer conversions
- ISO4217WCCIPBridge: eMoney/CBDC compliance
- SecurityCCIPBridge: Accredited investor checks
- CommodityCCIPBridge: Certificate validation
- BridgeOrchestrator: Asset-type routing

### Phase 3: Liquidity Integration ✅
- LiquidityManager: Multi-provider orchestration
- DODOPMMProvider: DODO PMM wrapper
- PoolManager: Auto-pool creation

### Phase 4: Extensibility ✅
- PluginRegistry: Pluggable components
- ProxyFactory: UUPS/Beacon proxy deployment
- ConfigurationRegistry: Zero hardcoded addresses
- BridgeModuleRegistry: Pre/post hooks

### Phase 5: Vault Integration ✅
- VaultBridgeAdapter: Vault-bridge interface
- BridgeVaultExtension: Operation tracking

### Phase 6: Testing & Security ✅
- Integration tests: Full flows
- Security tests: Access control, reentrancy
- Fuzzing tests: Edge cases
- Audit preparation: AUDIT_SCOPE.md

### Phase 7: Documentation & Deployment ✅
- System architecture documentation
- Developer guides (adding new assets)
- Deployment scripts (5 phases)
- Deployment checklist

## Extensibility (Never Box In)

7 mechanisms to prevent architectural lock-in:
1. Plugin Architecture - Add asset types without core changes
2. Upgradeable Contracts - UUPS proxies
3. Registry-Based Config - No hardcoded addresses
4. Modular Bridges - Asset-specific contracts
5. Composable Compliance - Stackable modules
6. Multi-Source Liquidity - Pluggable providers
7. Event-Driven - Loose coupling

## Statistics

- Contracts: 30+ created (~5,000+ LOC)
- Asset Types: 10+ supported (infinitely extensible)
- Tests: 5+ files (integration, security, fuzzing)
- Documentation: 8+ files (architecture, guides, security)
- Deployment Scripts: 5 files
- Extensibility Mechanisms: 7

## Result

A future-proof system supporting:
- ANY asset type (tokens, GRU, eMoney, CBDCs, securities, commodities, RWAs)
- ANY chain (EVM + future non-EVM via CCIP)
- WITH governance (hybrid risk-based approval)
- WITH liquidity (PMM integrated)
- WITH compliance (built-in modules)
- WITHOUT architectural limitations

Add carbon credits, real estate, tokenized bonds, insurance products,
or any future asset class via plugins. No redesign ever needed.

Status: Ready for Testing → Audit → Production
2026-01-24 07:01:37 -08:00

324 lines
8.8 KiB
Markdown
Raw Blame History

# Task 4: Cross-Chain Integration Testing Plan
**Date**: 2025-01-18
**Status**: ⏳ **TESTING PLAN READY** (Depends on Bridge Configuration)
**Priority**: 🔴 CRITICAL
## Overview
Comprehensive testing plan for cross-chain integration between ChainID 138 and Ethereum Mainnet using CCIP bridges.
## Prerequisites
### 1. Bridge Configuration ✅ REQUIRED
**Current Status**: ⚠️ **NOT CONFIGURED** (from Task 7)
**Required Actions**:
- Configure Mainnet bridges with ChainID 138 as destination
- Configure ChainID 138 bridges with Mainnet as destination
- Verify destination chain selectors are correct
**See**: `TASK7_BRIDGE_CONFIG_VERIFICATION.md` for configuration details
### 2. Off-Chain Services ✅ REQUIRED
**Current Status**: ⏳ **TEMPLATES READY** (from Tasks 2-3)
**Required Actions**:
- Implement state anchoring service (template available)
- Implement transaction mirroring service (template available)
**See**:
- `TASK2_STATE_ANCHORING_SERVICE.md` - Service implementation guide
- `TASK3_TRANSACTION_MIRRORING_SERVICE.md` - Service implementation guide
### 3. Test Environment Setup ✅
**RPC Endpoints**:
- Mainnet: `https://eth.llamarpc.com` or Infura
- ChainID 138: `http://192.168.11.211:8545` (VMID 2101)
**Test Accounts**:
- Test account with ETH on Mainnet
- Test account with ETH on ChainID 138
- Sufficient LINK tokens for CCIP fees
## Test Plan
### Phase 1: Bridge Configuration Verification
#### Test 1.1: Verify Destination Chain Configuration
**Objective**: Verify bridges are configured with correct destination chains
**Steps**:
1. Query `getDestinationChains()` on Mainnet CCIPWETH9Bridge
2. Verify ChainID 138 selector is in the list
3. Query `destinations(chainSelector)` to verify receiver bridge address
4. Repeat for CCIPWETH10Bridge
5. Repeat on ChainID 138 bridges (Mainnet as destination)
**Expected Results**:
- ChainID 138 bridges configured on Mainnet
- Mainnet configured on ChainID 138 bridges
- Correct receiver bridge addresses set
**Command**:
```bash
# Check Mainnet bridge destinations
cast call 0x3304b747E565a97ec8AC220b0B6A1f6ffDB837e6 \
"getDestinationChains()(uint64[])" \
--rpc-url https://eth.llamarpc.com
# Check specific destination
cast call 0x3304b747E565a97ec8AC220b0B6A1f6ffDB837e6 \
"destinations(uint64)(uint64,address,bool)" \
<CHAINID_138_SELECTOR> \
--rpc-url https://eth.llamarpc.com
```
#### Test 1.2: Verify CCIP Router Connection
**Objective**: Verify bridges are connected to CCIP Routers
**Steps**:
1. Query `ccipRouter()` on all bridges
2. Verify router addresses match expected values:
- Mainnet: `0x80226fc0Ee2b096224EeAc085Bb9a8cba1146f7D`
- ChainID 138: Verify router address
**Expected Results**:
- Correct CCIP Router addresses on all bridges
### Phase 2: Small Amount Test Transfers
#### Test 2.1: Mainnet → ChainID 138 (WETH9)
**Objective**: Test WETH9 transfer from Mainnet to ChainID 138
**Steps**:
1. Approve WETH9 on Mainnet for bridge
2. Call `sendCrossChain()` on Mainnet CCIPWETH9Bridge
3. Monitor CCIP message ID
4. Wait for CCIP confirmation
5. Verify WETH9 received on ChainID 138
6. Verify balance on destination chain
**Test Amount**: 0.001 WETH9 (small test amount)
**Expected Results**:
- Transaction succeeds on Mainnet
- CCIP message ID emitted
- WETH9 received on ChainID 138 at recipient address
#### Test 2.2: ChainID 138 → Mainnet (WETH9)
**Objective**: Test WETH9 transfer from ChainID 138 to Mainnet
**Steps**:
1. Approve WETH9 on ChainID 138 for bridge
2. Call `sendCrossChain()` on ChainID 138 CCIPWETH9Bridge
3. Monitor CCIP message ID
4. Wait for CCIP confirmation
5. Verify WETH9 received on Mainnet
**Test Amount**: 0.001 WETH9
#### Test 2.3: Mainnet → ChainID 138 (WETH10)
**Objective**: Test WETH10 transfer from Mainnet to ChainID 138
**Steps**: Same as Test 2.1 but using WETH10 bridge
#### Test 2.4: ChainID 138 → Mainnet (WETH10)
**Objective**: Test WETH10 transfer from ChainID 138 to Mainnet
**Steps**: Same as Test 2.2 but using WETH10 bridge
### Phase 3: State Synchronization Testing
#### Test 3.1: State Anchoring Service Test
**Objective**: Verify state anchoring service works
**Steps**:
1. Deploy/start state anchoring service
2. Monitor ChainID 138 blocks
3. Verify state proofs submitted to MainnetTether
4. Verify state proofs stored on-chain
5. Query `getStateProof()` to verify data
**Expected Results**:
- State proofs anchored regularly
- Data accessible via `getStateProof()` on MainnetTether
- Events emitted correctly
#### Test 3.2: Transaction Mirroring Service Test
**Objective**: Verify transaction mirroring service works
**Steps**:
1. Deploy/start transaction mirroring service
2. Perform test transaction on ChainID 138
3. Verify transaction mirrored to TransactionMirror
4. Verify transaction data queryable
5. Verify events indexed correctly
**Expected Results**:
- Transactions mirrored to Mainnet
- Transaction data accessible
- Events searchable on Etherscan
### Phase 4: Integration End-to-End Tests
#### Test 4.1: Complete Bridge Flow (Both Directions)
**Objective**: Test complete bridge flow in both directions
**Steps**:
1. Mainnet → ChainID 138 transfer
2. Verify on ChainID 138
3. ChainID 138 → Mainnet transfer (same amount back)
4. Verify on Mainnet
5. Verify state anchored
6. Verify transactions mirrored
**Expected Results**:
- Round-trip transfer succeeds
- Balances correct on both chains
- State synchronization works
- Transaction mirroring works
#### Test 4.2: Multiple Concurrent Transfers
**Objective**: Test multiple transfers happening simultaneously
**Steps**:
1. Initiate 3 transfers from Mainnet to ChainID 138
2. Initiate 2 transfers from ChainID 138 to Mainnet
3. Monitor all transfers complete
4. Verify all amounts received correctly
**Expected Results**:
- All transfers complete successfully
- No double-spending or replay issues
- Correct amounts on both chains
### Phase 5: Edge Cases and Error Handling
#### Test 5.1: Insufficient LINK Fees
**Objective**: Verify error handling for insufficient LINK
**Steps**:
1. Attempt transfer with insufficient LINK balance
2. Verify transaction reverts with clear error
**Expected Results**:
- Transaction reverts
- Clear error message about insufficient fees
#### Test 5.2: Invalid Destination Chain
**Objective**: Verify error handling for invalid destination
**Steps**:
1. Attempt transfer to unconfigured chain selector
2. Verify transaction reverts
**Expected Results**:
- Transaction reverts
- Error about destination not enabled
#### Test 5.3: Zero Amount Transfer
**Objective**: Verify zero amount is rejected
**Steps**:
1. Attempt transfer with amount = 0
2. Verify transaction reverts
**Expected Results**:
- Transaction reverts
- Error about invalid amount
## Test Execution Checklist
### Pre-Testing Setup
- [ ] Bridge destinations configured (Mainnet ↔ ChainID 138)
- [ ] Test accounts funded with ETH on both chains
- [ ] LINK tokens available for CCIP fees
- [ ] WETH9/WETH10 approved for bridges
- [ ] State anchoring service running (optional)
- [ ] Transaction mirroring service running (optional)
### Test Execution
- [ ] Phase 1: Configuration verification complete
- [ ] Phase 2: Small amount test transfers complete
- [ ] Phase 3: State synchronization tests complete
- [ ] Phase 4: End-to-end integration tests complete
- [ ] Phase 5: Edge cases tested
### Post-Testing Verification
- [ ] All balances correct on both chains
- [ ] State proofs anchored correctly
- [ ] Transactions mirrored correctly
- [ ] No errors in logs
- [ ] All CCIP messages confirmed
## Testing Scripts
### Manual Testing
Use `cast` commands for manual testing:
```bash
# Send cross-chain transfer
cast send 0x3304b747E565a97ec8AC220b0B6A1f6ffDB837e6 \
"sendCrossChain(uint64,address,uint256)" \
<CHAINID_138_SELECTOR> \
<RECIPIENT_ADDRESS> \
1000000000000000 \
--rpc-url https://eth.llamarpc.com \
--private-key $PRIVATE_KEY
```
### Automated Testing
Create test scripts using Foundry/Forge:
- `test/ccip/CrossChainIntegration.t.sol` - Integration tests
- `test/ccip/BridgeFlow.t.sol` - Bridge flow tests
## Dependencies
1. ✅ **Bridge Configuration** - Required before testing (Task 7 shows not configured)
2. ✅ **Off-Chain Services** - Optional but recommended (Templates ready)
3. ✅ **Test Accounts** - Required for transfers
4. ✅ **CCIP Fee Tokens** - LINK tokens required
## Current Status
**Blockers**:
- ⚠️ Bridge destinations not configured (from Task 7)
- ⏳ Off-chain services not implemented (templates ready)
**Ready for Testing**:
- ✅ RPC endpoints available
- ✅ Contracts deployed and verified
- ✅ Test plan documented
## Next Steps
1. **Configure Bridge Destinations** (Task 7 finding)
2. **Implement Off-Chain Services** (if needed for state anchoring/mirroring)
3. **Execute Test Plan** - Phase 1 through Phase 5
4. **Document Test Results**
---
**Status**: ⏳ **TESTING PLAN READY - AWAITING BRIDGE CONFIGURATION**
Reference in New Issue View Git Blame Copy Permalink