Add full monorepo: virtual-banker, backend, frontend, docs, scripts, deployment

Co-authored-by: Cursor <cursoragent@cursor.com>

docs/CCIP_PROCESS_GAP_ANALYSIS.md

@@ -0,0 +1,222 @@
+# CCIP Process Gap Analysis
+
+**Date**: 2025-01-12  
+**Status**: Gap Analysis Complete
+
+---
+
+## Overview
+
+This document identifies gaps in the CCIP implementation process, focusing on areas where the private key from `.env` can be used to complete remaining tasks.
+
+---
+
+## Identified Gaps
+
+### Gap 1: Automated Configuration Execution
+
+**Issue**: Scripts exist but no automated way to execute configuration using `.env` private key.
+
+**Current State**:
+- ✅ `configure-ethereum-mainnet-destination.sh` - Can use `.env` PRIVATE_KEY
+- ✅ `configure-all-bridge-destinations.sh` - Can use `.env` PRIVATE_KEY
+- ❌ No master script to execute all configuration automatically
+
+**Fix**: Create automated configuration script that:
+- Loads PRIVATE_KEY from `.env`
+- Checks current configuration status
+- Configures missing destinations automatically
+- Verifies configuration after each step
+
+---
+
+### Gap 2: Transaction Status Checking
+
+**Issue**: No automated way to check if stuck transaction is still pending.
+
+**Current State**:
+- ✅ `resolve-stuck-transaction.sh` - Manual check
+- ❌ No automatic detection of stuck transactions
+- ❌ No automatic retry mechanism
+
+**Fix**: Enhance scripts to:
+- Check pending transactions automatically
+- Detect stuck transactions
+- Provide automatic resolution options
+
+---
+
+### Gap 3: Pre-Configuration Validation
+
+**Issue**: No comprehensive pre-flight check before configuration.
+
+**Current State**:
+- ✅ Individual verification scripts exist
+- ❌ No unified pre-configuration validation
+- ❌ No check for sufficient gas/balance before configuration
+
+**Fix**: Create pre-configuration validation script that:
+- Checks PRIVATE_KEY is valid
+- Checks account has sufficient ETH for gas
+- Checks current nonce
+- Checks for pending transactions
+- Validates all destination addresses
+
+---
+
+### Gap 4: Post-Configuration Verification
+
+**Issue**: No automated verification after configuration.
+
+**Current State**:
+- ✅ `check-bridge-config.sh` - Manual verification
+- ❌ No automatic verification after configuration
+- ❌ No retry mechanism if configuration fails
+
+**Fix**: Enhance configuration scripts to:
+- Automatically verify after each configuration
+- Retry failed configurations
+- Report final status
+
+---
+
+### Gap 5: Complete Workflow Script
+
+**Issue**: No single script to execute complete workflow.
+
+**Current State**:
+- ✅ Individual scripts for each step
+- ❌ No orchestration script
+- ❌ Manual execution required
+
+**Fix**: Create master workflow script that:
+- Executes all steps in sequence
+- Uses PRIVATE_KEY from `.env`
+- Handles errors gracefully
+- Provides progress reporting
+
+---
+
+### Gap 6: Fee Calculation Integration
+
+**Issue**: Fee calculation not integrated into bridge scripts.
+
+**Current State**:
+- ✅ `verify-fee-calculation.sh` - Standalone verification
+- ❌ Fee calculation not used in bridge scripts
+- ❌ No LINK balance checking before bridging
+
+**Fix**: Integrate fee calculation into:
+- Bridge configuration scripts
+- Bridge operation scripts
+- Pre-flight checks
+
+---
+
+### Gap 7: Error Recovery
+
+**Issue**: Limited error recovery mechanisms.
+
+**Current State**:
+- ✅ Basic error handling in scripts
+- ❌ No automatic error recovery
+- ❌ No transaction replacement mechanism
+
+**Fix**: Add error recovery:
+- Automatic transaction replacement
+- Retry logic with backoff
+- Error reporting and logging
+
+---
+
+## Recommended Fixes
+
+### Fix 1: Create Master Configuration Script
+
+Create `scripts/configure-all-destinations-auto.sh` that:
+1. Loads PRIVATE_KEY from `.env`
+2. Validates pre-conditions
+3. Configures all destinations automatically
+4. Verifies configuration
+5. Reports results
+
+### Fix 2: Create Pre-Flight Validation Script
+
+Create `scripts/pre-flight-check.sh` that:
+1. Validates PRIVATE_KEY
+2. Checks account balance
+3. Checks nonce
+4. Validates destination addresses
+5. Reports readiness status
+
+### Fix 3: Enhance Configuration Scripts
+
+Update existing scripts to:
+1. Auto-verify after configuration
+2. Retry on failure
+3. Report detailed status
+4. Handle edge cases
+
+### Fix 4: Create Complete Workflow Script
+
+Create `scripts/complete-ccip-setup.sh` that:
+1. Runs pre-flight checks
+2. Configures all destinations
+3. Verifies configuration
+4. Tests bridge operations
+5. Generates final report
+
+---
+
+## Implementation Priority
+
+### High Priority (Critical Gaps)
+
+1. **Master Configuration Script** - Enables automated setup
+2. **Pre-Flight Validation** - Prevents configuration failures
+3. **Post-Configuration Verification** - Ensures success
+
+### Medium Priority (Important Gaps)
+
+4. **Complete Workflow Script** - Improves user experience
+5. **Error Recovery** - Handles edge cases
+6. **Fee Calculation Integration** - Prevents bridge failures
+
+### Low Priority (Nice to Have)
+
+7. **Transaction Status Monitoring** - Advanced feature
+8. **Automatic Retry Logic** - Convenience feature
+
+---
+
+## Files to Create/Update
+
+### New Scripts
+
+1. `scripts/configure-all-destinations-auto.sh` - Automated configuration
+2. `scripts/pre-flight-check.sh` - Pre-configuration validation
+3. `scripts/complete-ccip-setup.sh` - Complete workflow
+
+### Enhanced Scripts
+
+1. `scripts/configure-ethereum-mainnet-destination.sh` - Add auto-verification
+2. `scripts/configure-all-bridge-destinations.sh` - Add retry logic
+3. `scripts/wrap-and-bridge-to-ethereum.sh` - Add fee checking
+
+---
+
+## Testing Checklist
+
+After implementing fixes:
+
+- [ ] Master configuration script works with `.env` PRIVATE_KEY
+- [ ] Pre-flight checks catch all issues
+- [ ] Post-configuration verification confirms success
+- [ ] Error recovery handles failures gracefully
+- [ ] Complete workflow executes successfully
+- [ ] All scripts use PRIVATE_KEY from `.env` consistently
+
+---
+
+**Last Updated**: 2025-01-12
+