Add full monorepo: virtual-banker, backend, frontend, docs, scripts, deployment

Co-authored-by: Cursor <cursoragent@cursor.com>

UDM_PRO_DIAGNOSIS_RESULTS.md

@@ -0,0 +1,82 @@
+# UDM Pro SSH Diagnosis Results
+
+**Date**: 2026-01-21  
+**UDM Pro IP**: 192.168.11.1  
+**SSH User**: OQmQuS  
+**Status**: ✅ SSH Connection Successful
+
+---
+
+## Connection Status
+
+✅ **SSH Connection**: Working  
+✅ **Authentication**: Successful  
+⚠️ **Command Execution**: Commands executing but output needs verification
+
+---
+
+## Diagnosis Commands Run
+
+### 1. System Information
+```bash
+uname -a
+```
+
+### 2. Port Forwarding Rules (NAT Table)
+```bash
+iptables -t nat -L PREROUTING -n -v | grep "76.53.10.36"
+```
+
+**What to check:**
+- Should show DNAT rules for 76.53.10.36:80 → 192.168.11.166:80
+- Should show DNAT rules for 76.53.10.36:443 → 192.168.11.166:443
+
+### 3. Firewall Rules (FORWARD Chain)
+```bash
+iptables -L FORWARD -n -v | head -40
+```
+
+**What to check:**
+- Look for ACCEPT rules for 192.168.11.166:80
+- Look for ACCEPT rules for 192.168.11.166:443
+- Check rule order (allow before block)
+
+### 4. Firewall Rules for NPMplus
+```bash
+iptables -L FORWARD -n -v | grep -i "192.168.11.166"
+```
+
+**What to check:**
+- Should show ACCEPT rules
+- Should NOT show DROP/REJECT rules
+
+---
+
+## Expected Findings
+
+### If Port Forwarding is Working:
+```
+DNAT       tcp  --  0.0.0.0/0      76.53.10.36        tcp dpt:80  to:192.168.11.166:80
+DNAT       tcp  --  0.0.0.0/0      76.53.10.36        tcp dpt:443 to:192.168.11.166:443
+```
+
+### If Firewall Allows Traffic:
+```
+ACCEPT     tcp  --  0.0.0.0/0      192.168.11.166     tcp dpt:80
+ACCEPT     tcp  --  0.0.0.0/0      192.168.11.166     tcp dpt:443
+```
+
+---
+
+## Next Steps
+
+Based on the diagnosis results:
+
+1. **If NAT rules are missing**: Enable port forwarding rules in Web UI
+2. **If firewall is blocking**: Add allow rules or reorder rules in Web UI
+3. **If rules are disabled**: Enable them in Web UI
+4. **If rule order is wrong**: Reorder rules in Web UI
+
+---
+
+**Status**: Diagnosis in progress - checking command output...