Add full monorepo: virtual-banker, backend, frontend, docs, scripts, deployment

Co-authored-by: Cursor <cursoragent@cursor.com>

UDM_PRO_DIAGNOSIS_REPORT.md

@@ -0,0 +1,51 @@
+# UDM Pro Complete Diagnosis Report
+
+**Date**: Wed Jan 21 10:48:30 PST 2026
+**UDM Pro IP**: 192.168.11.1
+**SSH User**: OQmQuS
+
+---
+
+## 1. System Information
+
+
+
+## 2. Port Forwarding Rules (NAT Table)
+
+Checking for DNAT rules for 76.53.10.36:80/443 → 192.168.11.166:80/443
+
+**Status**: ❌ **Port forwarding rules are NOT active**
+**Issue**: No DNAT rules found for 76.53.10.36:80/443
+**Fix**: Enable port forwarding rules in UDM Pro Web UI
+
+## 3. Firewall Rules for NPMplus (192.168.11.166)
+
+Checking for ACCEPT rules for 192.168.11.166:80/443
+
+**Status**: ❌ **No firewall rules found**
+**Issue**: Firewall may be blocking traffic (default deny)
+**Fix**: Add allow rules for 192.168.11.166:80/443
+
+## 4. Firewall Rule Order
+
+Checking if allow rules come before block rules
+
+```
+
+```
+
+## 5. Analysis & Recommendations
+
+### Issue 1: Port Forwarding Not Active
+- **Problem**: No DNAT rules found for 76.53.10.36
+- **Fix**: Enable port forwarding rules in UDM Pro Web UI
+  1. Settings → Firewall & Security → Port Forwarding
+  2. Verify rules for 76.53.10.36:80/443 are **enabled**
+  3. Save and wait 30 seconds
+### Issue 2: Firewall Blocking Traffic
+- **Problem**: No allow rules or rules are blocking
+- **Fix**: Add/update firewall rules in UDM Pro Web UI
+  1. Settings → Firewall & Security → Firewall Rules
+  2. Ensure 'Allow Port Forward...' rules exist
+  3. Move allow rules to the **top** of the list
+  4. Save and wait 30 seconds